AT2780PCI DVB-T Modulator With ASI & IF & RF (PCI)
Targeted for Digital Video Professionals, Sophisticated End Users and OEMs
the AT2780PCI is an ideal solution for a number of applications such as:
- Development Tools for DVB-T/H/C Receiver R&D.
- IP to DVB Gateway.
- DVB-T/H/C Transport Stream Generation.
- Stand alone COFDM ( Terrestrial ) QAM ( Cable TV ) signal generator for Test & Validation.
- Demonstration and Trade Shows.
- DVB-T/H/C output for OEM product.
Standard Features: - Combined COFDM & QAM Modulator with VHF & UHF Upconverter, DVB-T/H/C Modulator.
- PCI 2.2, 32 bit, 33/66MHz 3.3V.
- Bus Master DMA, Scatter /Gather Interface Protocol.
- Windows 2000, XP Drivers and Linux Drivers & API.
- Accompanied by DVSStation2 Alitronika's Application Software.
- Supports DVB According to Standard A1010 Rev1 and EN50083.
- Modulation of Transport Stream files from Harddisk.
- Modulation of Transport Stream from the ASI or SPI inputs.
- All modulation processes are carried out by the hardware so that there is no load on the PC processor, So there is no need for an expensive high performance PC.
- Supports Burst or continuous modes, 188 and 204 packet sizes.
- RF & IF Section are in metal enclosure for noise immunity and high performance
Input- DVB-ASI input.
- DVB-SPI input.
Output- RF Output.
- IF Outputs ( one internally, SMB connector, to be used inside the PC to connect to other boards ).
- DVB-ASI output for monitoring the modulated TS file.
