AT800USB DVB-T (Terrestrial )Receiver, Full TS Recorder
Targeted for Digital Video Professionals, Sophisticated End Users and OEMs
the AT800USB is an ideal solution for a number of applications such as:
- Development Tools.
- DVB to IP Gateway.
- DVB-T to DVB-ASI & DVB-SPI Converter.
- MPEG-II Transport Stream Recording, Monitoring, Playing & Processing.
- Software Based MPEGII Decoders.
Standard Features: - Combined DVB-T Input and DVB-ASI/SPI Output Device.
- High Speed USB 2.0
- Windows 2000 & XP Drivers and BDA / Direct Show Drivers & API.
- Accompanied by DVSStation2 Alitronika's Application Software.
Input- DVB-T Compliant COFDM Reception.
- Input Frequency Range:
UHF: 470 MHz to 862 MHz.
VHF: 174 MHz to 230 MHz.
- Modulation Modes: QPSK, 16QAM, 64QAM.
- COFDM Spectrum: DVB-T and DTG compliant.
- Supports 188, 204 Transport Packet Sizes.
- Output
- RF Loop Through Output.
- Simultaneous two Serial ( ASI ) and one Parallel ( SPI ) Outputs.
- Supports DVB According to Standard A1010 Rev1 and EN50083.
Specification: - On Board Buffer: 16 Mbytes
- RF Tuner Connector: 75 Ohms IEC female Type
- Loop Through Connector: 75 Ohms IEC male Type.
- Input Frequency Range:
UHF: 470 MHz to 862 MHz.
VHF: 174 MHz to 230 MHz.
- Channel Bandwidth: 6, 7 & 8 MHz.
- Channel Assignment: C.C.I.R Channel and +/- 166.666KHz offset.
- COFDM Spectrum: 2k and 8k carriers non-hierarchical and hierarchical.
- Standards: DVB-T and DTG compliant.
- Modulation Modes: QPSK, 16QAM and 64QAM.
- Guard Interval Modes: 1/32, 1/16, 1/8 and 1/4 active symbol duration.
- DVB-ASI Connector: 75 Ohms BNC.
- Output Signal level: 1.0Vp-p nominal.
- DVB-SPI Connector: 25-pin sub-D.
- DVB-ASI Output Bit Rate: 0 to 214 Mbit/s.
- DVB-SPI Output Bit Rate: 0 to 108 Mbit/s.
- DVB-ASI Output Clock: 270 MHz.
- DVB-SPI Output Clock: 0 to 13.5 MHz.
- DVB-SPI Output Level: LVDS.
