The VisionRGB-E2S, a stand alone PCI Express x4 plug in capture card, delivers extreme performance with 650MB/s transfer bus bandwidth providing a further improvement to the 480MB/s of the VisionRGB-E2. This video capture has two complete capture channels supporting up to 1920x1200 DVI or 2048x1536 Analog resolution.
The VisionRGB-E2S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a Datapath graphics card is used, the VisionRGB-E2S capture card transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E2S capture card sends the relevant portions of each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E2S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
The VisionRGB-E2S capture card is an ideal solution for applications require the capture of Analog or DVI sources in real time. Typical applications include:
Viewing Analog or DVI sources from PCs, MACs, Industrial or medical equipment, cameras and other video equipmentStreaming video applicationsVideo wall controllersFor streaming applications, the VisionRGB-E2S can be used with Windows® Media Encoder to compress and stream captures video. To replay the video, use Windows® Media Player.
Any application compatible with Windows® Direct-Show technology can use the VisionRGB-E2S video capture card due to its built in WDM support.
On board processor for real time mode and sync detection
When used with the Datapath range of graphics card, the CPU load is negligible even if the image is being upscaled to a video wall, resulting in real time performance
The VisionRGB-E2S captures data at a maximum pixel rate of 340MHz. Once captured, the data is converted to either 555, 565 or 888 pixel and YUV modes display formats and then transferred over the PCI bus to host memory, for display on the desktop
- HD capture for each channel up to 1080P at 60 frames per second, HDMI capture up to 1080P and DVI up to 1920 x 1200
Dynamic input source selection
The VisionRGB-E2s application program is also built into the Datapath Wall Control-red video wall software
High performance DMA to system memory or direct to graphics memory with scatter gather
|Board format||PCI Express x4 half size card, 110mm x 170mm
PCI Express bus master with scatter gather DMA
|Connectors||Two DVI-I type connectors|
|Maximum sample rate||170 MHz analogue RGB or 165 MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling
|Maximum data rate||
VisionRGB-E2 480 MB/s
VisionRGB-E2s 650 MB/s
|Video sampling||RGB: 24 bits per pixel/8-8-8 format|
|Video capture memory||64 MB (updated in real time). Triple buffered|
|Analog RGB mode support||640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536,Custom modes|
|DVI single-link mode support||640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200, and Custom modes|
|HD modes||1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component HD-DVI connector (HDCP not supported)|
|Input mode detection||Automatic detection of input modes in hardware enabling the tracking of mode changes in the source signal|
|Pixel transfer formats||
RGB: 555, 565 or 888 pixels (24bit/32bit) pixels.
YUV 4:2:2, UYVY, YUY2, YVYU
User defined, captured frame rate will match the source providing max data rate (650MB/s is not exceeded)
Triple buffered to eliminate tearing artifacts.
|Video format options||
Analog RGB plus HSync and VSync (5 wire)
Analog RGB with Composite Sync (4 wire)
Analog RGB with Sync on Green (3 wire)
DVI Single Link
|Operating system support||Windows® XP Professional, Windows® Server 2003, Windows Vista®, Windows® Server 2008, Windows® 7 (x86 and x64 Operating Systems), Windows® 8 and Linux
Max current at +3.3V - 0.25A.
Max current at +12V - 1.2A.
Max power - 15 Watts.
|Operating temperature||0 to 35 deg C.|
|Storage temperature||-20 to 70 deg C.|
|Relative humidity||5% to 90% non-condensing|
|Analog input range||Min 0.5Vpp Max 1.0Vpp|
|Input offset||+/- 2V|
|Hsync||15kHz - 110kHz|
|Vsync||No hardware limits, typically 25Hz - 200Hz for real signals|
|Separate sync polarity||Positive or Negative. (Separate H & V sync, Composite Sync)|
|Sync on green polarity||Negative|
|Inputs||75 Ohm terminated|