Add More 
Antrica HDMI & Composite HD Encoder/Decoder
Encode or decode your 1080p30 HDMI and Composite signals, and stream via the fast-ethernet LAN port
Product Overview
ANT-32000A HDMI & Composite Input ONVIF H.264 HD 1080P30 Video Encoder, capable of up to a maximum 1920 x 1200 at 30 frames per sec encode with dual streaming using an IP LAN ethernet connection. The inputs are HDMI (DVI) and Composite with full ONVIF profile S control for integration with VMS software, such as Milestone / Exac etc. The inputs and outputs are provided to allow for signal bypassing or looping. Multiple streaming formats are supported such as TCP/IP, Multicast, UDP, HTTP, SMTP, FTP, DHCP, DNS, Dynamic DNS, RTP, RTSP, SNMP. The encoder or decoder has on board recording via USB for monitoring and litigation purposes and can be powered via 12V or PoE. AAC and G711 two way audio is supported with analogue audio support. RS232/485/422 2 way serial data communication, motion detection , sensor and alarm I/O. Rack mountable with 1U rack mount kit available supporting up to 3 encoders.
|
Key Features
|
System |
Mode |
Encoder / Decoder |
Standards |
ONVIF Profile S, RTSP, RTP, MPEG-TS |
|
Latency |
>150mS (system dependant) |
|
Video |
Compression |
H.264 (MJPEG) |
Profile |
Baseline & High |
|
Frame Rate |
1-30 fps |
|
Bit Rate |
32k-10 mbps |
|
Mode |
GOP |
|
Bit Rate Control |
CBR, VBR |
|
Min Resolution |
352 x 240 |
|
Max Resolution |
1920 x 1080 |
|
Number of Streams |
Primary 1 x H.264 / Secondary 1 x H.264 or MJPEG |
|
Inputs |
1 x HDMI (DVI) , 1 x Composite |
|
Input Combinations |
Any 1 Input |
|
Outputs |
1 x HDMI (DVI), 1 x Composite Bypass |
|
Output Combinations |
Any 1 Output |
|
On Screen Display |
Multi-Lingual |
|
Audio |
Mode |
Full Duplex Stereo |
Compression |
G.711 + AAC |
|
Sample Rate |
G711 = 8Khz , AAC= 32/44.1/48kHz |
|
Bit Rate |
G711=64kbps, AAC= 64/128kb/s |
|
Streaming |
2 Way Stereo |
|
Inputs |
Analogue Stereo Jack (1vpp) |
|
Outputs |
Analogue Stereo Jack (1vpp) |
|
Network |
Interface |
10-100 Ethernet RJ45 |
Protocols |
IPv4/v6, TCP, UDP, IGMP(Multicast), ICMP, DHCP,HTTP, HTTPS, RTP,RTSP, FTP, SNMP, SMTP, DNS |
|
Security |
Password Protection, Ip Address Filtering, HTTPS |
|
Configuration |
SDK, ONVIF, WEB |
|
Data |
Type |
Serial 2 Way |
Interface |
RS232, RS422, RS485 |
|
Protocol |
Pelco D + others |
|
Alarm |
2 Output + Buzzer |
|
Sensor |
2 Input |
|
Event |
Sources |
Motion, Sensor Input, Client Disconnection |
Actions |
Email, FTP, PTZ Preset , Alarm Control, Recording |
|
Power |
Supply |
PoE or 12v |
Adapter input volts |
AC 110-240v |
|
Adapter Output Voltage |
12v DC |
|
Consumption |
9.6w |
|
Recording |
Edge Storage |
USB |
Temperature |
Operating Range |
-10 + 50C |
Physical |
Dimensions |
134 x 125 x 37 mm |
Weight |
563g |
|
Housing |
Black/Silver Aluminum |
|
General |
Certifications |
CE , FCC, RoHS |
Software |
IP Finder + VMS |
|
Warranty |
12 Months |
|
Remote |
N/A |
|
Reset |
Web or external |
|
Control & Set Up |
Set Up |
Web Interface API Document |
Control |
API |
|
Upgrade |
Firmware Upgrade |
1x Encoder/Decoder
1x 12V Power Supply & lead
1x Fixing Kit
