Decode your 3G-SDI, HDMI, and Composite video (1080p60 max.), with the option for up to 100 programmable IP streams and a local quad-split output.

Product Overview
ANT-36000 HDMI,3G HD-SDI & Composite Output H.264 HD 1080P60 Video Decoder, capable of up to a maximum 1920 x 1200 at 60 frames per sec decode using an IP LAN ethernet connection. Can discover & display most IP streams and conformant to the most widely used CCTV standards. Up to 100 IP programmable stream decode using an IOS / Android app to control. The ANT-36000 can display in single or quad view. Quad view decodes four 1080P streams and scales these to fit a 1080P display output (Quad View). The inputs are 3G HD-SDI, HDMI DVI and Composite with full discovery & display most IP streams and conformant to the most widely used CCTV standards discovery/control, meaning PTZ cameras can be controlled through this decoder when connected to a joystick. The inputs and outputs are provided to allow for signal bypassing or looping. Multiple streaming formats are supported such as TCP/IP, Multicast, UDP, HTTP, SMTP, FTP, DHCP, DNS, Dynamic DNS, RTP, RTSP, MPEG-TS, SNMP. The decoder can be powered via 12V or PoE. AAC and G711 two way audio is supported with embedded audio in HD-SDI & HDMI or analogue audio jack. RS232/485/422 2 way serial data communication, motion detection, sensor and alarm I/O. Rack mountable with 1U rack mount kit available supporting up to 3 encoders. |
Key Features
|
System |
Mode |
Decoder |
Standards |
ONVIF Profile S, RTSP, RTP, RTMP, MPEG-TS |
|
Latency |
>150mS (system dependant) |
|
Video |
Compression |
H.264 |
Profile |
Baseline & High |
|
Frame Rate |
1-60 fps |
|
Bit Rate |
32-16 mbps |
|
Mode |
GOP |
|
Bit Rate Control |
CBR, VBR |
|
Min Resolution |
352 x 240 |
|
Max Resolution |
1920 x 1080 |
|
Number of Streams |
Up to 100 Single View Decode or 4 x 1080p30 Quad Mode |
|
Inputs |
N/A |
|
Input Combinations |
N/A |
|
Outputs |
1 x HDMI (DVI) , 1 x 3G-SDI , 1 x Composite |
|
Output Combinations |
All 3 Available Simultaneously |
|
On Screen Display |
Multi-Lingual |
|
Audio |
Mode |
Full Duplex Stereo |
Compression |
G.711 + AAC |
|
Sample Rate |
G711 = 8Khz , AAC= 32/44.1/48kHz |
|
Bit Rate |
G711=64kbps, AAC= 64/128kb/s |
|
Streaming |
2 Way Stereo |
|
Inputs |
Analogue Stereo Jack (1vpp) or Embedded Audio |
|
Outputs |
Analogue Stereo Jack (1vpp) or Embedded Audio |
|
Network |
Interface |
10-100 Ethernet RJ45 |
Protocols |
IPv4/v6, TCP, UDP, IGMP(Multicast), ICMP, DHCP,HTTP, HTTPS, RTP,RTSP MPEG-TS, FTP, SNMP, SMTP,DNS |
|
Security |
Password Protection, Ip Address Filtering, HTTPS |
|
Configuration |
SDK, ONVIF, WEB |
|
Data |
Type |
Serial 2 Way |
Interface |
RS232, RS422, RS485 |
|
Protocol |
Pelco D + others |
|
Alarm |
2 Output + Buzzer |
|
Sensor |
2 Input |
|
Event |
Sources |
Motion, Sensor Input, Client Disconnection |
Actions |
Email, FTP, PTZ Preset , Alarm Control |
|
Power |
Supply |
PoE or 12v |
Adapter input volts |
AC 110-240v |
|
Adapter Output Voltage |
12v DC |
|
Consumption |
9.6w |
|
Recording |
Edge Storage |
N/A |
Temperature |
Operating Range |
-10 + 50C |
Physical |
Dimensions |
133 x 125 x 32mm |
Weight |
470g |
|
Housing |
Black Aluminum |
|
General |
Certifications |
CE , FCC, RoHS |
Software |
IP Finder |
|
Warranty |
12 Months |
|
Remote |
N/A |
|
Reset |
Web or external |
|
Control & Set Up |
Set Up |
Web Interface API Document |
Control |
API |
|
Upgrade |
Firmware Upgrade |
1x Decoder
1x 12V Power Supply & Lead
1x Fixing Kit
1x Country Adapter