AJA UHD/HD HDBaseT to 6G-SDI/HDMI (PoH & Genlock)

SKU: ROVORX-SDI

Receive uncompressed sources via HDBaseT Ethernet and distribute it with 4x6G-SDI outputs, HDMI, and 2 channel stereo audio out for versitility

£837.00 £1,004.40
SKU
ROVORX-SDI

RovoRx-SDI is an UltraHD/HD HDBaseT Receiver with four integrated 6G/3G-SDI outputs and HDMI video and audio outputs specifically designed to receive RovoCam’s output. Receive the RovoCam’s video and audio up to 100m away from the camera, and output to SDI monitors, routers and recorders and HDMI TVs and devices. RovoRx-SDI also offers a DA (Distribution Amplifier) Mode for extensive output options. The HDBaseT connector on RovoRx-HDMI supports camera uncompressed video, audio, power, and control, all over a single Cat 5e/6 cable, greatly simplifying cabling and systems integration.

Features

  • 4x 6G/3G-SDI outputs support video and embedded audio for incredible multi-format compatibility
  • 8-Channels (4 pairs) of SDI embedded audio supported
  • DA Mode for distributing 6G/3G-SDI UltraHD and HD signals from HDBaseT sources
  • HDMI simultaneous output for UltraHD and HD displays
  • REF in/out that can be genlocked with other broadcast gear
  • USB port for software configuration of SDI settings
  • Power over HDBaseT (PoH), allowing RovoCam to be powered remotely from its physical location

Flexible Connectivity

RovoRx-SDI offers a lot of power for HDBaseT workflows, receiving uncompressed video and audio, offering bidirectional VISCA support and PoH for powering RovoCam, all across a single Cat 5e/6 cable. With multiple 6G/3G-SDI outputs as well as HDMI, your options for distribution of RovoCam's UltraHD or HD imagery simplify any project's needs.

  • HDBaseT (RJ-45), Analog Video reference terminating Input
  • 4x 6G/3G-SDI Outputs
  • 1x HDMI 1.4 Output
  • 1x RCA Stereo Output
  • 1x REF In/Out 
  • 1x 3.5mm TRS Input for RS-232 bidirectional signals
  • 1x RS232 for RovoControl software

Distribution Amplified

RovoRx-SDI uniquely offers a DA Mode for Distribution Amplification output of incoming HDBaseT video sources.  

DA Mode allows one HDBaseT video source to be output via multiple 6G/3G-SDI connections, opening up the opportunity for simultaneous recording, routing and display of RovoCam imagery.

Power Up

PoH or Power over HDBaseT is a lifesaver for those working on live events, in studios and other signal sensitive environments. By supplying RovoCam's power from a remote location, signal interference is mitigated and cabling is greatly simplified. RovoRx-SDI can provide power to RovoCam or to third party HDBaseT transmitters, all across a single category cable alongside video, audio and control signals. 

Video Formats

  • (UltraHD) 3840 x 2160p 25, 29.97
  • (HD) 1080p 50, 59.94
  • (HD) 1080i 50, 59.94
  • (HD) 720p 50, 59.94
  • (SD) 625i
  • (SD) 525i

Video Input

  • HDBaseT (RJ-45), Analog Video reference terminating input
  • REF IN supports tri-Level and bi-level sync (SDI outputs only)

Video Outputs

  • HDMI 1.4b, No EDID negotiation, No embedded audio
  • 6G-SDI output on SDI 1-4
  • 4x 6G-SDI while in "DA Mode"
    • (UltraHD) 3840 x 2160p 25, 29.97 
    • (UltraHD) 4:2:2 or 4:4:4 (4x BNC)
    • (UltraHD) LFR 3.0 GB 2SI (2x BNC)
    • (UltraHD) LFR 1.5 GB 2SI (4x BNC)
  • 3G-SDI (Level A or B)   
    • (HD) 1920 x 1080p 50, 59.94
  • HD-SDI   
    • (HD) 1920 x 1080i 50, 59.94   
    • (HD) 1280 x 720p 50, 59.94
  • SD-SDI   
    • (SD) 625i 50   
    • (SD) 525i 59.94

Video Displays

HDBaseT Cable Run Performance for 4K/UltraHD/HD

W x HFrame RateColor
Sampling
Max. Cable LengthMax. Bit
Depth
Cat 5e/6Cat 6a/7
1920 x 1080 < 30 fps 4:2:2 100 meters 100 meters 16-bit
> 30 fps 4:2:2 100 meters 100 meters 12-bit
4:2:2 70 meters 100 meters 16-bit
2048 x 1080 < 30 fps 4:2:2 100 meters 100 meters 16-bit
> 30 fps 4:2:2 100 meters 100 meters 12-bit
4:2:2 70 meters 100 meters 16-bit
3840 x 2160 < 30 fps 4:4:4 70 meters 100 meters 8-bit
> 30 fps 4:2:0 70 meters 100 meters 8-bit
4096 x 2160 < 30 fps 4:4:4 70 meters 100 meters 8-bit
> 30 fps 4:2:0 70 meters 100 meters 8-bit
 
 

Audio Output Digital

  • 2-Channels (1 pair) of SDI embedded audio supported
  • Rates supported: 48 kHz


Note: No Audio on HDMI output 

Audio Output Analog

  • 2x RCA connectors, 2-Channel unbalanced

 

Note: This feature only works when used in conjunction with RovoCam Audio 

RS-232

  • 1x 3.5mm TRS Input for RS-232 bidirectional signals

USB Config

  • 1x USB for configuration with AJA Mini-Config

Size (w x d x h)

  • 4.66” x 6.97” x 0.94” (118.37 x 177.04 x 23.88 mm)

Weight

  • 0.8 lbs (0.4kg)

Power

  • RovoRx-SDI only: 48V @ 303mA = 14.5W typical, 48V @ 335mA = 16W max
  • RovoRx-SDI powering RovoCam: 48V @ 450mA = 21.6W typical, 48V @ 480mA = 23W max

Environment

  • Safe Operating Temperature: 0 to 40 C (32 to 104 F)
  • Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)
Write Your Own Review
You're reviewing:AJA UHD/HD HDBaseT to 6G-SDI/HDMI (PoH & Genlock)
Your Rating

Secure Payment

All of our transactions are encrypted to the highest global standards. Our payment systems are monitored and audited regularly by a world leading Qualified Security Assessors (QSA) with our payment gateway partner being reguarly certified to PCI Service Provider Level 1, so you can be confident our services are completely secure.