AJA SMPTE ST 2110 AV to 3G-SDI Mini-Converter

SKU: IPR-10G2-SDI-R0

Monitor/convert two HD SMPTE ST 2110 signals across a 10Gb Ethernet interface to two 3G-SDI outputs

£1,172.00 £1,406.40
SKU
IPR-10G2-SDI-R0

IPR-10G2-SDI provides monitoring of HD SMPTE ST 2110 signals across 10 GigE to two 3G-SDI ouputs.
 
It receives SMPTE 2110 over 10 GigE connectivity, formats the data for output over 3G-SDI, and the associated audio from the video stream is extracted, synchronized, and embedded into the 3G-SDI signal and also output on an analog RCA interface. 
 
The IPR-10G2-SDI features 2x 10 GbE SFP+ cages allowing “hitless switching”, providing redundancy protection for critical distribution and monitoring applications.
 
The IPR-10G2-SDI also offers 1x Reference In via BNC. This makes it ideal for integrating into existing basebands environments such as master control, a truck, or an edit suite.

Features

IPR-10G2-SDI extracts a SMPTE ST 2110 essence from an incoming IP stream and presents it for display on SDI devices.  Providing two SFP+ cases for protection with "hitless switching". Its rugged, fanless, Mini-Converter design is ideal for placement in a wide range of display scenarios, from studios to field.

 

Key features:

  • SMPTE ST 2110 audio, video receiver
  • Supports HD up to 60p, YCbCr 4:2:2     
  • Rugged, fanless design
  • 2x 10 GigESFP+ cages for media LAN (providing support for "hitless switching) with status light
  • 1x 1 GigERJ45 socket for control LAN with status light
  • 2x 3G-SDI Outputs
  • Full 10-bit pixel processing pipeline
  • Embedded SDI audio output (up to eight channels)
  • 2x RCA analog audio output
  • 1x BNC Reference In
  • 1x mini-USB port for initial network configuration with AJA eMini-Setup software
  • Complete control interface on any web browser from a built-in webserver
  • Customizable control with AJA REST API
  • 5-year international warranty and support

Monitor ST 2110 Video and Audio from anywhere on the Network.

The IPR-10G2-SDI is a SMPTE ST 2110 to SDI Mini-Converter suited for point-of-use applications including source monitoring and 3G-SDI output to compatible devices. With two 3G-SDI outputs with mirrored source video, you can drive a display and connect to 3G-SDI simultaneously.

 

With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay via IP and provide SDI monitoring at the destination while feeding your video and audio further into a 3G-SDI chain.

 

The AJA IPR-10G2-SDI receives SMPTE ST 2110 IP video and audio, then formats the data for output over 3G-SDI.

 

The audio associated with the video stream is extracted, synchronized, and then embedded into the SDI interface as well as output on an analog RCA interface.

User Control

IPR-10G2-SDI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration, and firmware updates.

  • 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
  • HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
  • Web and REST clients supported
  • 1x USB 2.0 Mini-B (IEC 62680-1) connector
  • AJA eMini-Setup of network parameters

Video Formats

  • (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (HD) 1920 x 1080i 50, 59.94
  • (HD) 1280 x 720p 50, 59.94, 60
  • (SD) 625i 50
  • (SD) 525i 59.94

Video Quality

  • 10-bit, 4:2:2, uncompressed

Discovery, Registration and Control

  • NMOS
  • Ember Plus (no discovery, control only)

Media Transport Interfaces

  • SMPTE ST 2110
    • 2x SFP+ Cages - SFPs not included 
  • Recommended 10 GigE SFP+ modules:
    • Arista Networks SFP-10G-SR Compatible 10GBASE-SR 
    • Fiberstore SFP-10GSR-85 10G SFP+ 850nm
    • Finisar FTLX1471D3BCL (for single mode 1310nm)
    • Mellanox MFM1T02A-SR 850nm 10G

 

Note: Maximum supported SFP+ power is 500 mWatts per SFP+ cage

Video Input IP

  • SMPTE ST 2110
    • Single channel input
    • Dual channel input for hitless switching (based on SMPTE ST 2022-7)

Video Output Digital

  • 2x 3G SDI BNC (single source, mirrored output)
    • 4:2:2 10-bits/pixel (embedded audio)

Audio Output Digital

  • Up to 8-Channel, SDI embedded audio, 24-bit per channel, 48 kHz synchronous

Audio Output Analog

  • 2x RCA analog audio
    • Levels at -10 dBu (nominal) 

Reference

  • 1x BNC
    • Analog Color Black or HD tri-level sync
    • Reference input is terminated into 75 ohms 

User Controls

  • 1x RJ-45 for 10/100/1000 Base-T Ethernet
    • Web and REST clients supported
  • 1x USB 2.0 Mini-B connector
    • AJA eMini-Setup of network parameters via local desktop computer

Size (w x d x h)

  • 5.07" x 0.94" x 5.06" (128.78 x 23.88 x 128.52 mm)

Weight

  • 0.6 lb (0.3 kg)

Power

  • 5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)

Environment

  • Safe Operating Temperature: 0 to 40 C (32 to 104 F)
  • Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)
Write Your Own Review
You're reviewing:AJA SMPTE ST 2110 AV to 3G-SDI Mini-Converter
Your Rating

What's Included?

  • 1 x HD10AVA Mini-Converter
  • 1 x Analogue AV breakout cable
  • Power supply kit

Secure Payment

All of our transactions are encrypted to the highest global standards. Our payment systems are monitored and audited regularly by a world leading Qualified Security Assessors (QSA) with our payment gateway partner being reguarly certified to PCI Service Provider Level 1, so you can be confident our services are completely secure.